JM fine spray nozzles high pressure
Fine Spray Nozzles Nozzle Factory
You are here:Spray Nozzles > Spray Nozzles > Fine Spray Nozzles
JM fine spray nozzles high pressure

JM fine spray nozzles high pressure

  • 【YBS Spray Nozzles】Supply JM fine spray nozzles high pressure And Other Products。

    Download PDF : PDF Nozzle Download

    Video : JM fine spray nozzles high pressure

  • Details

JM series of high fine atomizing nozzle Product Description:

1, the production of the nozzle opening can be made of stainless steel material, it can be ruby ​​nozzle body made of stainless steel.

2, high-pressure spray nozzles are artificial fog system is one of the key components, artificial fog works mainly used in gardens, parks, city squares, film base, such as military bases and residential areas. This effect is natural and realistic atomizing nozzle, mist stays in the air for a long time, low cost, the most important is that it can purify the air.

3, this nozzle droplet size is 7um-20um, its instantaneous height of 1500mm spray around in the breeze or no wind condition, it can be filled to a height of ten meters.

4, a single spray can spread to two square meters or more, spray angle range of 30 ° -170 °. This type of nozzle with a filter device, this design greatly reduces the incidence of nozzle clogging. Guangdong Perth company minimum can be 0.05mm, accuracy of up to ± 0.002mm, this technology has reached the world advanced level, in normal circumstances, the interface is 1/8 "NPT, Guangdong Perth can also provide imperial 1/8 "BSPT interface or metric M10 * 1 interface.

5, the nozzle material: made of stainless steel nozzle body, the nozzle can be made of stainless steel (NJ-S) or Ruby (NJ-R) is made, under normal circumstances, stainless steel nozzles to meet your needs, and the production of stainless steel nozzle Chan The lower, in exceptional circumstances, you can use ruby ​​nozzle. Guangdong Perth suggested that, for JM fine atomizing nozzles, the stainless steel nozzle should not exceed the maximum working pressure of 70 bar, ruby ​​nozzle should not exceed the maximum working pressure of 100 bar. If you exceed the maximum working pressure will accelerate the wear of the nozzle orifice, resulting in shortening the life of the nozzle.

JM series of high fine atomizing nozzle spray pattern:

FUD spray drying nozzle spray pattern

JM series of high fine atomizing nozzle general application:

Cooling, environmental dust, humidity, artificial mist.

JM series of high fine atomizing nozzle for environmental dust JM series of high pressure atomizing nozzle for fine mist landscape JM series of high fine atomizing nozzles for humidification plant greenhouses
JM series of high fine atomizing nozzle for environmental dust JM series of high pressure atomizing nozzle for fine mist landscape JM series of high fine atomizing nozzles for humidification plant greenhouses
Guangdong Perth JM series of high fine atomizing nozzle performance data
Aperture (mm) Flow (L / min) Pressure (PSI) Thread Size
0.15 0.035-0.05 435-1015 NPT1/8-27
0.20 0.06-0.09 435-1015 NPT1/8-27
0.30 0.095-0.165 435-1015 NPT1/8-27
0.40 0.14-0.22 435-1015 NPT1/8-27
0.50 0.17-0.285 435-1015 NPT1/8-27





JM fine spray nozzles high pressure



Back to top nozzle| nozzles| spray| spray nozzles| spray nozzle| Spiral Spray| Fan nozzle| Industrial nozzle| Cone nozzle| Sitemap
CopyrightYBS Spray Nozzles Supply Air Spray Nozzles, Spiral Spray Nozzles, Flat Fan Nozzles, Industrial Nozzles, Solid Cone Nozzles And Hollow Cone Nozzles.