spray nozzles atomization
Spray Nozzle Nozzle Factory
You are here:Spray Nozzles > Spray Nozzles > Spray Nozzle

spray nozzles atomization

Author:YBS Spray Nozzles Time:2013-10-25 9:15:05

Generally, under the same conditions (flow rate, pressure, spray angle), the type of spray nozzle atomization performance differences:

1) air spray nozzle atomization finest particles, 30 microns to 50 microns routine, the flow of spray spray gun at 100 microns

2) Secondly fan spray nozzles

3) and then followed by a hollow cone spray nozzles

4) solid cone spray nozzles particles about 1 mm

5) the largest particles spiral spray nozzles

Conventional spray pattern of different applications

Select the spray pattern is more complex, often multiple spray patterns are possible. Is usually required to fully understand the actual process and then to determine which one is the best.

Solid cone used for:

Cooling and quenching

Cleaning Products

Exhaust air or washing

Dust suppression

Rain test

Hollow cone that can be used:

Gas scrubbing

Gas cooling

Water cooling

Heat exchange dust suppression

Humidity

Chemical treatment

Evaporative cooling,

Fan-shaped spray nozzles can be used for:

Roll cooling

Pressure Cleaning

Coating

spray nozzles atomization



Next: No!
Back to top nozzle| nozzles| spray| spray nozzles| spray nozzle| Spiral Spray| Fan nozzle| Industrial nozzle| Cone nozzle| Sitemap
CopyrightYBS Spray Nozzles Supply Air Spray Nozzles, Spiral Spray Nozzles, Flat Fan Nozzles, Industrial Nozzles, Solid Cone Nozzles And Hollow Cone Nozzles.